PANASONIC Laptop Battery Using Instruction
Most of the new Laptop Battery
at the factory are set to sleep mode, the first boot with only about 5% of the electricity. You should not use an external power supply at this time, let the notebook battery
exhausted, until shutdown, then switch on the external ac adapter and the first charge had better over 15 hours. After fully charged, you should charge after the exhaustion of batter, the time of the second and third charge should be more than 12 hours, in order to activate PANASONIC Laptop Battery
and lay a good foundation for future use.
life is measured in terms of the number of charging and discharging. Do not enable the PANASONIC Laptop Battery
unless it is necessary, if you don't use the battery for a long time, you should charge it to about half full and place in a cool place to keep. If you enable the PANASONIC battery
, you should run out of power after the charging, and do not plug in the AC power before exhausted. When the PANASONIC Laptop Battery
fully charged, you should disconnect the AC input because overcharge will make the PANASONIC battery
overheat and that will shorten the PANASONIC battery
Generally speaking, nowadays the laptop are with intelligent PANASONIC battery
protection, the PANASONIC Laptop Battery Pack
will not be damaged due to normal operation, but still may damaged for the life-span of travelmate battery or other special reasons.
Lithium-ion PANASONIC Laptop Battery
should fast charge in constant current and then switch to slow charge in constant voltage when the voltage reaches a certain value. Usually the laptop doesn't have a strictly constant-current charge monitoring device. Charge current will turn small when system load large and vice versa, the current is decided by the PANASONIC AC adapter
power margin, it is obviously.
Discharge in a current as small as possible, the action is to slow down the CPU, stop the hard disk, adjust the screen to the most dark, and then do not run any programs until the laptop automatically shut down. The reason to emphasize the small current discharging is to prevent the PANASONIC
laptop premature detect the battery