Paslode 902672 Battery Charger For Nailer 902400 Battery, Framing 905600

Warehouse address for shipping: Ontario, California, United States. Usually Ship in 3 - 7 working days   Enquiry free
Images Battery Charger Specifications Today's Price
  • For Battery Type: Li-ion
  • Input: 120V AC 60Hz 22W
  • Output: 8.4V DC 2A
  • For Brand: Paslode
  • Color: Black
  • Brand New: A brand-new, unused, unopened, undamaged item in its original packaging

On Sale: US $46.45

secure Easy and Secure Pay
moneyback 30-Day Money Back
warranty 1 Year Warranty

Paslode 902672 Charger For 7.2V 902654 Drill Battery

THIS CHARGER IS FOR THE 902654 LIT-ION BATTERY WHICH WORKS WITH LIT-ION FRAMING NAILER 902600 AND LIT-ION ANGLED FINISH NAILER 902400.

  • For use with Paslode 7.4V Li-ion battery (Part # 902654)
  • Battery is fully charged in 1.5 hours and drives up to 9,000 nails per charge in Framing Nailers and 12,000 nails per charge in trim nailers (Battery not included)
  • 2x faster charge time; 2 minute quick charge will drive up to 200 nails
  • 1.5 hour 120V AC battery charger
  • Part # 902672

Paslode 404717 Power Tool Battery On Sales

  • Type: Li-ion
  • Volt: 7.2V
  • Capacity: 2000mAh
  • Color: Black
  • Weight: 130.35g
  • Dimension: 80.00 x 45.30 x 35.75mm

How to Repair a Paslode Power Tool Battery Charger?

Cordless power tool run primarily on a detachable and removable battery pack. When your cordless drill stops holding a charge, there are a few factors that come into play. But most commonly, you can trace the issue back to your battery pack or external battery charger. While you can rebuild the battery pack, it is a complex procedure. In many cases, you can solve the problem by repairing the battery charger itself.

  • Remove the battery pack from the charging unit. Do this by pressing on the release buttons on either side of the battery pack. Disconnect the charger's power cord from the nearest electrical outlet.
  • Blow out all dust and debris from within the charger's contacts with a can of compressed air. Use a medium-grit file to file down the contacts slightly. This is only to clean the charger's contacts of any accumulation of dirt or battery acid.
  • Apply some rubbing alcohol to a clean wash cloth or paper towel. Thoroughly wipe down the inside of the battery charger's compartment. Allow five minutes for the alcohol to dry.
  • Plug in the battery charger and insert the battery pack into the charger. You may have to remove and re-insert the battery pack several times before making a connection, depending on how much dirt has accumulated on the charger's contacts.

Refer any major electrical repairs to a power tool repair technician. Dismantling the charger yourself will void your drill's warranty.

More Power Tool Battery and Charger Usage Tips